Scaffold Accessories
Product Name:Scaffold fittings,Scaffolding connector,Scaffold accessories
Scaffold Accessories Types:Ringlock accessories,Formwork accessories,Scaffold prop accessories, Scaffolding coupler
Ringlock Accessories:Ringlock rosette,Ringlock ledger head,Ringlock pins,Ringlock brace,Ringlock spigot
Formwork Accessories:Formwork nuts,Water stoppers,Washer plates,Formwork clamps,Formwork tie rod
Scaffold Prop Accessories:Scaffold prop tripod,Scaffold prop sleeve,Scaffold prop nut,Scaffold prop pin,Scaffold prop fork head,Scaffold prop plate
Scaffolding Coupler:Double coupler,Swivel coupler,Girder coupler,Putlog coupler,Sleeve coupler
Ringlock scaffolding Accessories
Ringlock scaffolding accessories include rosette rings, ledger heads brace ends, wedge pins, brace heads, etc.
Ringlock rosette as a central connection point in the scaffolding system with two sizes of OD48mm and OD60mm.
Ringlock ledger head Connects the horizontal ledgers to the vertical standards. Length can range from 80 to 150 mm to provide a secure connection.
Ringlock brace end used to connect diagonal braces to the scaffolding structure, adding stability and preventing swaying.Length can be around 100 to 120 mm to ensure a solid connection.
Ringlock pins Hold the ring lock connections in place by inserting through the holes in the rosettes and other connectors. Small in size, usually a few centimeters in length and with a diameter that fits snugly into the connection holes.
Ringlock spigot is a male connector that is inserted into the female end of another scaffold component. A spigot might have a diameter of 48.3 mm and a length of around 150 mm.
Formwork scaffolding Accessories
Formwork nuts are used in conjunction with tie rods to hold the formwork panels in place by applying tension. Formwork nuts sizes depending on the diameter of the tie rods.
Water stoppers are installed at the joints between formwork panels to prevent the leakage of concrete slurry.
Formwork clamps are used to fasten adjacent formwork panels together. They provide a secure connection and prevent the panels from separating or shifting during the construction process.
Washer plates are placed between the formwork nut and the formwork surface. Washer plates are generally larger in diameter than the formwork nut.
Formwork Accessories are concrete form parts and elements used to build into formwork in the concrete shuttering work. Formwork accessories are also concrete formwork accessories, construction formwork accessories or shuttering accessories, etc.
scaffolding prop Accessories
Scaffold prop jack nuts are used to adjust the height or length of the scaffolding prop. It is screwed onto the threaded end of the prop to increase or decrease the overall length of the prop, allowing for fine-tuning of the support height .
Scaffold prop plate is placed at the bottom end of the scaffolding prop to distribute the load evenly over a larger area.It is might have a square or circular shape
Scaffold prop lock pins are used to secure the different components of the scaffolding prop together. It is inserted through holes or slots in the prop components to lock them in place, preventing accidental disassembly or movement.
Scaffold prop sleeves are typically a tubular structure that fits over the main body of the prop. By adjusting the position of the sleeve along the prop, the effective length of the prop can be changed.
scaffolding couplers and clamps
Scaffolding swivel clamp:Enables connection between scaffold tubes at different angles. It allows for diagonal bracing and angled connections to accommodate various configurations and directions
Scaffolding double clamp: Used to connect two scaffold tubes end to end between parallel tubes, enhancing the overall rigidity of the scaffolding.
Scaffolding half coupler:Used for partial connections or in situations where a full coupler is not required. It can be used to attach a single tube to another at an angle .
Scaffolding putlog coupler: Used to attach putlogs (horizontal tubes that support the working platform) to the vertical standards.
Scaffold girder clamp: Used to attach girders or heavy-duty horizontal members to the scaffolding structure.
Scaffolding joint clamp : Used to connect tubes at joints or intersections
Scaffold Swivel Coupler
Double Coupler Scaffolding
Putlog Clamp Scaffold
Scaffold Half Coupler
Joint Clamp Scaffolding
Forged Double Coupler
Scaffold Sleeve Coupler
Girder Clamps Scaffold
Scaffold Accessories Products
